SAW Filters for RF and IF Applications

FCom manufactures and supplies SAW bandpass filters for RF and IF signal paths. Browse standard series by center frequency, package and performance requirements, or discuss a custom SAW filter for your application.

RoHS-Compliant Options

AEC-Q200 Options Available

CSP · SMD · PCB · DIP

Explore SAW Filter Series

Contact an FCom Engineer

Not sure where to start?

Three ways to match your needs, or quickly contact FCom’s engineering team.

By Package Size & Mounting

Start with the available PCB area and assembly method, from miniature CSP platforms to standard SMD and through-hole packages.

Miniature CSP

Standard SMD

Through-Hole

By Frequency Band & Filter Requirement

Define the target center frequency or passband first, then narrow the choice by bandwidth, insertion loss and required rejection.

GNSS Bands

ISM/ Sub-GHz

IF/ VHF/ UHF

Low Insertion Loss

High Rejection

By Application

Use the signal-chain position and end equipment to establish the required band, blocker conditions, environmental limits and package platform.

Smart Metering

Remote Control

GNSS Receivers

Industrial Wireless

Automotive Telematics

SAW Filter Series & Package Selection

Compare FCom SAW filter families by package size and mounting style. Open each series page to review available frequencies, bandwidth, insertion loss and rejection, then confirm the complete specifications in the product-specific datasheet.

1. Choose a Series or Family

Compare package size and mounting style.

2. Review Available Frequencies

Compare center frequencies and key electrical parameters.

3. Confirm the Part Number

Open the product-specific PDF for complete specifications.

Series / Package Family	Included Series	Package / Mounting	Selection Focus	Series Page
FSF-3030 Family	FSF-3030 · FSF-303C · FSF-303E	SMD / CSP · 3.0 × 3.0 mm	Compact general-purpose RF and IF bandpass filtering.	View Frequencies
FSF-3838	FSF-3838	SMD · 3.8 × 3.8 mm	Standard SMD option for established RF layouts.	View Frequencies
FSF-5050	FSF-5050	SMD · 5.0 × 5.0 mm	Broad IF, VHF, UHF and Sub-GHz frequency options.	View Frequencies
FSF-7050	FSF-7050	SMD · 7.0 × 5.0 mm	Larger SMD platform for compatible existing layouts.	View Frequencies
FSF-1109 / FSF-1411 Family	FSF-1109 · FSF-1411	CSP · 1.1 × 0.9 / 1.4 × 1.1 mm	Ultra-miniature RF and GNSS designs with limited board area.	View Frequencies
FSF-2015 / FSF-2520 Family	FSF-2015 · FSF-2520	CSP · 2.0 × 1.5 / 2.5 × 2.0 mm	Compact layouts between miniature and standard package platforms.	View Frequencies
FSF-F11 / FSF-F12 Family	FSF-F11 · FSF-F12	Through-Hole · DIP-F11 / DIP-F12	Industrial, remote-control, traditional-radio and legacy-design replacement applications.	View Frequencies
FSF-4090	FSF-4090	PCB · 4.0 × 9.0 mm	PCB-mounted platform for its specific mechanical format.	View Frequencies

Custom SAW Filters and Technical Support

Need a configuration beyond the listed options? Send your passband, bandwidth, insertion-loss limit, rejection mask, impedance, operating conditions and package requirements. FCom will review suitable standard SAW filters or assess the feasibility of a custom solution.

Discuss Your SAW Filter Requirements

For supporting documents or available S-parameter data, please [ Contact Our Engineering Team ] with the exact part number and required test conditions.

Matched a series? Here’s what comes next.

Once you’ve narrowed down the series, the next step is confirming that the selected filter works in the actual signal chain—not only on the datasheet. FCom supports the following design-in process:

Phase 01 // Data

Request Technical Data

Access the latest product-specific datasheet, frequency-response data, package drawing, recommended land pattern and reflow profile. S-parameter files are available for selected parts.

Phase 02 // Engineering

Validate Filter Match

Submit the center frequency or passband, bandwidth, insertion-loss budget, rejection mask, source and load impedance, package and operating conditions. Our engineering team reviews matching, layout and board-level validation requirements.

Full-Cycle Engineering Services

Beyond standard product selection, FCom provides technical support throughout the complete SAW filter design-in process: