- Home
- Frequency Control & Timing Devices
- SAW Filters and Resonators | Crystal Filters
SAW Filters and Resonators — Precise RF and IF Frequency Selection
FCom provides SAW filters and resonators for RF front-end band selection, interference suppression, and oscillator frequency stabilization, together with crystal filters and MCFs for narrowband IF and channel selection. Explore product series, specifications, and datasheets to support component selection and design-in.
RF Reference Stabilization
RF Front-End Band Selection
Narrowband IF Selection
- RF Reference & Frequency Stabilization
SAW Resonators
Frequency-selective resonant elements designed for RF oscillator and transmitter reference circuits in remote-control, wireless-security and short-range radio applications.
- Use When:Stabilizing an RF oscillator or transmitter reference
- Signal-Chain Position:Oscillator or RF reference loop
- Product Scope:Selected frequencies within the 315 MHz to 915 MHz product range; available frequencies, tolerance, temperature and package options vary by series.
- Select By:Frequency, tolerance, temperature behavior and package
- RF Front-End Band Selection
SAW Filters
Bandpass devices designed to pass the required RF band while attenuating unwanted signals outside the passband in wireless receivers, transmitters and RF modules.
- Use When:Passing the required RF band while attenuating unwanted out-of-band signals
- Signal-Chain Position:Receiver or transmitter RF front end
- Product Scope:Application-specific RF bandpass configurations with center-frequency, bandwidth, impedance, input-power, temperature and SMD package options.
- Select By:Center frequency, passband, insertion loss, rejection, impedance and input power
- Narrowband IF & Channel Selection
Crystal Filters & Monolithic Crystal Filters
Quartz filter networks for narrowband IF and channel-selection applications requiring high selectivity, controlled bandwidth and strong adjacent-channel attenuation.
- Use When:Providing narrowband IF or channel selection
- Signal-Chain Position:Post-mixer IF or channel-selection stage
- Product Scope:Narrowband crystal and monolithic crystal filter configurations with IF-frequency, bandwidth, termination, coupling, pole and package options.
- Select By:IF frequency, bandwidth, selectivity, terminating impedance, pole configuration and package.
The Difference Is Under the Lid, and It Starts Before the Quartz Is Cut
Rigorous raw material grading, precision cut-angle engineering, and documented manufacturing stability.
Certified Materials
In-House Acoustic Structure Design
Manufacturing Stability
Certified Materials
Core materials are sourced directly from verified global suppliers, including Kyocera ceramic bases and Heraeus conductor paste. Strict inspection and grading are enforced on every incoming lot at the gate prior to production release to eliminate variance.
In-House Acoustic Structure Design
We design the acoustic structure before wafer patterning, optimizing substrate orientation, IDT geometry, reflectors, metallization, and topology to achieve the target frequency response.
5+ Years
Documented Manufacturing Stability
Production lines maintain a verified 5+ year tracking record of zero process drift. Our quality team utilizes this historical data through full-parameter OQC to ensure that future production lots match established baseline requirements.
Try One or a Hundred. There is No Quantity Limit.
Standard in-stock samples ship within 48 to 72 hours, accelerating initial bench validation and removing volume friction prior to production scaling.
Free
Samples
Engineers can initiate bench validation immediately with zero MOQ constraints on standard in-stock series. Logistics pipelines guarantee a 48-to-72 hour shipment turnaround for all non-custom components.
1 pieces · 48–72h shipment
100%
Custom Engineering
Specialized frequency, tolerance, or load capacitance requirements undergo direct parameter evaluation by the internal technical group. Our team delivers a comprehensive feasibility response within one working day.
1 working day response · Dedicated engineering team
Verified Through Global Supplier Audits
Our manufacturing lines passed qualification for Arrow, Digikey, Jabil, and Honeywell.
Arrow
Supply Chain Audited
Digikey
Inventory Traceability Verified
Jabil
Manufacturing Line Approved
Honeywell
Reliability Standard Certified
Trace
We isolate and trace root causes directly to the specific production lot.
Correct
We enforce an 8D corrective action process with complete lot-level traceability.
Prevent
Our team integrates process improvements directly back into active manufacturing lines.
ISO 9001
Quality management systems — process consistency across every production batch
ISO 14001
Environmental management — compliant manufacturing operations
RoHS & REACH
Full material compliance documentation available for every shipment
AEC-Q200
Automotive-grade qualification for under-hood and safety-critical applications