Key Features
- Package size: 7.0 × 5.0 × 1.9 mm
- Standard frequencies: 10, 12.8, 13, 16.8, 19.2, 20, 26, 30.72, 38.4, 40, 52 MHz
- Frequency range: 5–52 MHz
- Output options: clipped-sine (0.8 Vp-p) or CMOS (VOH ≥ 0.8·Vcc, VOL ≤ 0.2·Vcc)
- Frequency stability: ±2.0 ppm (−30~+75 °C), ±2.5 ppm (−40~+85 °C)
- Pull range (VCTCXO): ±5 ppm min (typ ±9 ppm)
- Phase noise (19.2 MHz): −148 dBc/Hz @10 kHz offset
- Start-up time: ≤3 ms
- Control voltage (Vc): 0.4–2.4 V
- Supply voltage: 2.5 V / 3.3 V
- Current consumption (typ): 3.5 mA (clipped-sine) / 6 mA (CMOS)
- Operating temperature: −40 °C to +85 °C
Background reading: Crystal vs MEMS Oscillators — Stability and Noise · TCXO vs OCXO — How to choose
Detailed Specifications
| Parameter | Specification | Notes |
|---|---|---|
| Frequency range | 5–52 MHz | Standard frequencies listed in Key Features |
| Frequency stability | ±2.0 ppm (−30~+75 °C) or ±2.5 ppm (−40~+85 °C) | Option dependent |
| Output | Clipped-sine (0.8 Vp-p) or CMOS | CMOS: VOH ≥ 0.8·Vcc, VOL ≤ 0.2·Vcc |
| VCTCXO control voltage | 0.4–2.4 V | Applies to VCTCXO option |
| Pull range | ±5 ppm min (typ ±9 ppm) | VCTCXO option |
| Phase noise (19.2 MHz) | −148 dBc/Hz @10 kHz offset | Typical |
| Start-up time | ≤3 ms | Max |
| Supply voltage | 2.5 V / 3.3 V | Selectable |
| Supply current (typ) | 3.5 mA (clipped-sine) / 6 mA (CMOS) | Typical |
| Operating temperature | −40 °C to +85 °C | See stability option for temperature class |
Selection tip: if your system budget is phase-noise-limited (PLL/LO), consider an HP option; if your node is outdoors, consider a WT option.
Applications
Where these specs matter: stable frequency and low phase noise reduce PLL wander and improve synchronization margin in real timing chains.
- Wireless base stations and radio equipment — including 5G small cells
- Microwave backhaul timing and synchronization
- 1588 PTP and Sync reference chains — see What Are Timing Devices?
- GNSS-disciplined timing nodes — TCXO for GNSS Applications
- Communication sync and Satcom timing — Sync + GNSS + Satcom timing
- Outdoor edge timing nodes — Outdoor edge timing
For ppb-class holdover or tighter noise floors, consider our OCXO Product Line.
Ordering Code / Options
| Code | Option | Notes |
|---|---|---|
| VDD | 2.5 V / 3.3 V | Select supply voltage |
| OUT | CMOS / clipped-sine | Choose output type |
| STAB | ±2.0 / ±2.5 ppm | Temperature range dependent |
| TEMP | −40~+85 °C | Operating range |
| FREQ | 5–52 MHz | See standard list above |
Example part number: FVT7S-33-C-20-Y-30.72M (example only; refer to datasheet for final code rules).
Selection Path / Upgrade Options
- Outdoor wide-temperature: FVT-7S-WT
- Low-jitter / PLL reference: FVT-7S-HP
- Family routing (sync + GNSS + Satcom): TCXO family for sync
- Industrial wireless + GNSS selection: Selection guide
More on architecture choices: TCXO/VCTCXO sync + GNSS + Satcom engineering guide · Outdoor timing: TCXO vs OCXO
Documents and Downloads
Compare Other TCXO Models
| Model | Size (mm) | Freq. Range | Output | Power | Stability | Applications |
|---|---|---|---|---|---|---|
| FVT-2S | 2.5×2.0 | 10–52 MHz | Clipped-sine | 1.5 mA | ±2.0 ppm | GPS, Mobile |
| FVT-3S | 3.2×2.5 | 10–52 MHz | Clipped-sine | 1.5 mA | ±2.0 ppm | IoT, WLAN |
| FVT-5S | 5.0×3.2 | 10–52 MHz | Clipped-sine / CMOS | 1.5–10 mA | ±2.0 ppm | Telecom, GPS |
| FVT-6S | 2.0×1.6 | 10–52 MHz | Clipped-sine | 1.5 mA | ±2.0 ppm | Wearables, IoT |
| FVT-7S | 7.0×5.0 | 5–52 MHz | Clipped-sine / CMOS | 3.5–6 mA | ±2.5 ppm | Wireless, Base Station |
See each product page for final specifications.
FAQ
What output options does FVT-7S support?
Clipped-sine (0.8 Vp-p) or CMOS output. CMOS levels are specified as VOH ≥ 0.8·Vcc and VOL ≤ 0.2·Vcc.
What is the frequency stability over temperature?
±2.0 ppm over −30 °C to +75 °C, and ±2.5 ppm over −40 °C to +85 °C (option dependent).
Can I request samples or custom frequencies?
Yes. We support samples, volume production, and customization (frequency, output type, supply, and pull range). Send your target conditions for quick routing.
Is pricing shown on the page?
Pricing is quotation-based. Send your RFQ with quantity, frequency, output type, supply voltage, temperature range, and delivery terms for a fast response.
What are typical lead time and MOQ?
MOQ and lead time depend on configuration and availability. Share your requirements and forecast; we will confirm sample and production schedules accordingly.
Application engineering support: share your timing architecture (PLL, LO, SyncE/PTP, GNSS discipline), phase-noise targets, and environmental limits. We will recommend the right TCXO/VCTCXO option and validate selection paths.